We are a Marsh Industries approved installer for the Marsh sewage treatment plant range. The range provides a discreet, reliable and affordable solution to sewage treatment for domestic dwellings and commercial premises without access to mains drainage.
Providing a safe environment for the collection and treatment of waste water, the Marsh range of sewage treatment plant produces a clear, odourless treated effluent suitable for discharge direct to a ditch, stream, or river. The treated effluent is also suitable for discharge into an underground soakaway / drainage field.
For further assistance and advice on selecting the appropriate sewage treatment plant, contact
us on 01255 853890 | enquiries@mantair.com – or by filling out the form on our contact us page.
The Marsh Sewage Treatment Plant: ENsign Range
The Marsh Ensign range of sewage treatment plants are widely regarded as the most efficient, reliable and economical domestic systems on the market.
The Ensign range is a single tank system which is installed completely below ground and uses Aeration Technology, incorporating a biozone for the growth of aerobic micro-organisms which degrade the sewage.
Approved to BSEN12566-3/A1:2009. CE marked.
Published test results of 11.5:19.2:8.4mg/ltr (BOD:suspended solids:ammonia), with influent concentrations on test higher than those chosen by most competitor plants, effectively equates to 97% pollutant removal. Ensign units provide treatment well within national consent
requirements.
Available in 4PE to 50PE models. When sizing a new sewage treatment plant the British Water Flows & Loads Code of Practice should be used. This Code of Practice provides the information required to ensure the correct size of treatment plant is installed.
Benefits from minimal visual impact on surroundings, low energy consumption, low maintenance requirements. Available with either pumped or gravity outlets.
Ensign:StandardTM
The Ensign:Standard is a robust unit with no internal moving parts meaning simple installation and commissioning and minimal long-term maintenance and cleaning.
Ensign:UltraTM
The standard Ensign has been adapted to improve reliability and the Ensign:Ultra brings unique enhancements to further improve noise level, treatment efficiency and final effluent quality.
The Marsh Sewage Treatment Plant: Shallow Ensign Range
Common sewage treatment plants on the market often exceed 2.3m high. The Marsh Shallow Ensign range is only 1.6m in height, meaning installations are not only possible, but easier and safer. Shallow Ensign’s are often favoured when hard rock site conditions mean deeper alternatives, involving costly and time-consuming excavation.
Available in 4PE to 35PE models.
Shallow Ensign:StandardTM
The Ensign:Standard is a robust unit with no internal moving parts meaning simple installation and commissioning and minimal long-term maintenance and cleaning.
Shallow Ensign:UltraTM
The Shallow Ensign:Ultra brings unique enhancements to further improve noise level, treatment efficiency and final effluent quality.
Find out more about the Ensign Range here
The Marsh Sewage Treatment Plant: Marsh Ultra:Polylok L (UPL)
The UPL draws upon Marsh Industries’ extensive experience in the industrial and commercial sewage treatment sectors bringing its outstanding performance and added-value engineering to the domestic sector.
Approved to BS EN12566-3. CE marked.
Available in 6PE and 12PE models.
Benefits from compact shape, reliability, ease of installation, cost-effectiveness and maintenance. Impressive effluent quality of 20:30:20, within national consent standards.
Contact Us
For further assistance and advice on selecting the appropriate sewage treatment plant, contact us on 01255 853890 | enquiries@mantair.com – or by filling out the form on our contact us page.